[ausev] Open Garage Saturday

[Roy Holder]

I want to replace another cable in the GEO.
I jave all the parts, just need a crimper.
I will try to come by and help, but Ive had bad allergys all week.



At 03:02 PM 4/20/2007 -0500, you wrote:
>Mike Delany wrote:
>> Mark,
>> Do you need a transmission jack?  You are welcome to come by this evening 
>> and pick it up (north central).  I doubt that I will be able to make it 
>> tomorrow, but this might help.
>>   
>Thanks!
>
>This time we went all the way, and pulled the upper battery racks and 
>dropped the motor and transmission.  So an engine crane (chris?) should 
>be all it takes to lower it in.
>
>I do need to make some adjustments to the motor hub tonight, to get it 
>moved forward on the shaft a bit.  The pressure plate to still too far 
>from the throwout bearing for the clutch to disengage.  We slid the hub 
>forward last time I had the stack apart, but the huge amount of force 
>required to disengage the racing clutch forced it back.  This time I 
>will have to drill some pockets on the motor shaft to give the setscrews 
>some bite.  (Or if someone has a lathe and can turn me a quick spacer 
>ring, that would work too.) 
>
>My house is at 11501 Circle Bend Dr, near the Lamar/Braker intersection.
>
>Mark Farver
>_______________________________________________
>AusEV mailing list
>AusEV at austinev.org
>http://www.austinev.org/mailman/listinfo/ausev
>