[ausev] Charger at Maker Faire?
Roy Holder
roy at holder3.com
Fri Oct 10 20:24:57 GMT 2008
I used that one this spring while my charger was being repaired.
it says both 120 and 144, but I only used 120v.
At 03:13 PM 10/10/2008 -0500, you wrote:
>There should also be a Bycan boat anchor somewhere that came out of Barr's
>Ghia.
>Marc
>
>-----Original Message-----
>From: ausev-bounces at austinev.org [mailto:ausev-bounces at austinev.org] On
>Behalf Of Brian Lasseter
>Sent: Friday, October 10, 2008 3:09 PM
>To: AustinEV News Announcements and General Discussion
>Subject: Re: [ausev] Charger at Maker Faire?
>
>On Fri, Oct 10, 2008 at 1:48 PM, Rob H <rob at zehicle.com> wrote:
>> For the Maker Faire crew,
>> Will anyone have a 110 VAC, 144 VDC charger that I can use for a charge?
>> The Expo's 220 VAC did not agree w/ my charger last year and I don't have
>> the range to make the round trip w/o a full load of electrons.
>
>My Saturn should be at the Maker Faire... (Though I will not be there
>until Sat evening.) Also, my Saturn conveniently enough also has a
>144VDC pack, with a PFC20 set to float the pack at something like
>180volts. (I don't remember exactly.)
>
>I may even have an extra Anderson Multipole, SB50 Housing if I'm
>lucky... you'll need to bring wire though.
>
>Aaron or Chris might have an extra PFC that is not bolted to the back
>of another car.
>
>
>--
>TTFN,
>Brian "Lasso" Lasseter
>
>"No Sane man will dance." -Cicero (106-43 B.C.)
>_______________________________________________
>AusEV mailing list
>AusEV at austinev.org
>http://www.austinev.org/mailman/listinfo/ausev
>
>No virus found in this incoming message.
>Checked by AVG - http://www.avg.com
>Version: 8.0.173 / Virus Database: 270.7.6/1716 - Release Date: 10/9/2008
>9:44 AM
>
>_______________________________________________
>AusEV mailing list
>AusEV at austinev.org
>http://www.austinev.org/mailman/listinfo/ausev
>No virus found in this incoming message.
>Checked by AVG - http://www.avg.com
>Version: 8.0.173 / Virus Database: 270.8.0/1718 - Release Date: 10/10/2008
7:07 AM
>
More information about the AusEV
mailing list